Should the customer request, expert Raymond Mill again under the installation and maintenance of Raymond mill.
1, Raymond mill site has not been installed, should be kept properly, the exposed surfaces shall be coated with anti rust oil, and avoid the sun and rain, to prevent rust water body, to establish the maintenance system.
2, plant and foundation should be based on the sufficient height installed base map size and installation position of Raymond mill, Raymond Mill Foundation shall be buried with reinforcing steel bars can be cast with high mark cement and, and pre buried conduit or cable trench. The concrete foundation is good, there must be 15 days of maintenance period.
3, there should be 2 ~ 3 tons lifting tool for installation, repair by Raymond mill.
4, Raymond mill from the factory to the time of use for more than 6 months, the central shaft system, transmission device, the grinding device, analysis of oil pool should be clean and check, cleaning after the examination of each part should add enough oil.
Future direction of machine optimization analysis of crushing jaw
At present, the level of the domestic crusher can completely meet the needs of national economic development, but compared to the world advanced level is still a lot to be improved. To stand firm in the fierce competition, only to increase innovation, constantly improve their own technical content, improve product quality, to catch up with the world level, to stabilize the domestic market, explore the international market.
Here to tell you in some of the technical aspects of improvement, mainly from the three aspects of the future direction of optimization of jaw crusher:
One, the choice of steel
The choice of steel is also the jaw crusher production material, wear is the main crushing equipment, jaw crusher wear parts of the machine are mainly the jaw and the guard plate, jaw plate adopt high quality high manganese steel alloy, the hardness of carbon steel to improve the material and adjust the proportion of tolerance in the casting process.
Two, the structure of jaw crusher
Including the appearance, shape and design optimization assembly components. Jaw crusher casing can casting and welding, can also be interfaced using bolts and other means, so that the jaw crusher in the use of the site's ability to adapt is greatly improved. Optimization of cavity shape, i.e. change the section shape of tooth plate, get the crushing cavity curve is more reasonable, the feeding and discharging to obtain the best fit, change the suspension height, the hanging height reduced, even down to zero or negative suspension, horizontal stroke of moving jaw to increase the lower end of the.
Now many manufacturers are trying very hard to use all one's skill on R & D and innovation, is leading the jaw crusher toward energy saving and efficient development, believe that break Chinese mass out of the country in the near future, occupy the world market.
impact crusher future development trends of machine
The further development of crushing technology, a variety of high performance counter impact crusher also emerge in an endless stream, in order to adapt to the changing needs of users, in the future growth, development will be mainly in the following areas dedicated to impact crusher:
1, research and development to improve the service life of the plate hammer with high wear resistance and high toughness model plate hammer material, improve the productivity.
2, the application of modern electromechanical integration technology and modern control methods, and continuously improve the degree of automation of the impact crusher, reducing the labor intensity of workers, improve the productivity.
3, the need to counter existing crusher structure to improve, enhance convenience crushing capacity and equipment for medium hard ore crusher maintenance, mainly to replace the improvements in the plate hammer, rotor structure to facilitate the plate hammer and clamping; counter frame structure optimization, a using crushing rate and energy rate of ore.
4, in order to meet the need of market and customer, impact crusher forward series standardization, large-scale development.
5, insist on technological innovation, gradually get rid of and imitate a single imported products. Enhance R & D counter intellectual crusher. Continue reading "maintenance of Raymond mill and optimization analysis of crushing machine"
↧